|
MTBU-10025-FC-DS:Threaded Design Swivot - M10 X 1.5 X 25 mm - Diamond Surface
|
 |
|
|
| PartNumber |
A Thread |
B Thread Length |
C Contact Dia |
D Stand Off |
E Degree Swivel |
F Int Hex |
Ball Dia |
Ball Only Part # |
Load Rating (lbs) |
CAD |
MTBU-10025-FC-DS |
M10x1.5 |
25 |
6 |
1.5 |
28 |
5 |
5 |
MBUB-050-FC-DS |
— |
|
MTBU-10035-FC-DS |
M10x1.5 |
35 |
6 |
1.5 |
28 |
5 |
5 |
MBUB-050-FC-DS |
— |
|
MTBU-10050-FC-DS |
M10x1.5 |
50 |
6 |
1.5 |
28 |
5 |
5 |
MBUB-050-FC-DS |
— |
|
MTBU-12025-FC-DS |
M12x1.75 |
25 |
8 |
2.0 |
28 |
6 |
7 |
MBUB-070-FC-DS |
3,440 |
|
MTBU-12035-FC-DS |
M12x1.75 |
35 |
8 |
2.0 |
28 |
6 |
7 |
MBUB-070-FC-DS |
3,440 |
|
MTBU-12050-FC-DS |
M12x1.75 |
50 |
8 |
2.0 |
28 |
6 |
7 |
MBUB-070-FC-DS |
3,440 |
|
MTBU-16025-FC-DS |
M16x2.0 |
25 |
11 |
3.0 |
28 |
8 |
10 |
MBUB-100-FC-DS |
5,190 |
|
MTBU-16035-FC-DS |
M16x2.0 |
35 |
11 |
3.0 |
28 |
8 |
10 |
MBUB-100-FC-DS |
5,190 |
|
MTBU-16050-FC-DS |
M16x2.0 |
50 |
11 |
3.0 |
28 |
8 |
10 |
MBUB-100-FC-DS |
5,190 |
|
MTBU-20030-FC-DS |
M20x2.5 |
30 |
14 |
3.0 |
28 |
10 |
13 |
MBUB-130-FC-DS |
8,379 |
|
MTBU-20050-FC-DS |
M20x2.5 |
50 |
14 |
3.0 |
28 |
10 |
13 |
MBUB-130-FC-DS |
8,379 |
|
MTBU-20070-FC-DS |
M20x2.5 |
70 |
14 |
3.0 |
28 |
10 |
13 |
MBUB-130-FC-DS |
8,379 |
|
MTBU-24040-FC-DS |
M24x3.0 |
40 |
19 |
4.0 |
24 |
10 |
15 |
MBUB-150-FC-DS |
12,233 |
|
MTBU-24080-FC-DS |
M24x3.0 |
80 |
19 |
4.0 |
24 |
10 |
15 |
MBUB-150-FC-DS |
12,233 |
|
The replaceable ball swivels to allow for self-alignment on uneven surfaces. A Viton O-ring holds the ball in place while keeping contaminants out and providing smooth ball movement. The housing is made from alloy steel, heat treated to Rc 43/46 with black oxide finish. The abrasive surface is permanently fused to a 300 series stainless steel pad. The surface texture is comparable to a 100 grit abrasive. They are ideal for holding smooth or slippery applications with a minimum of clamping pressure. Individual diamond particles transfer holding pressure to a very small and well distributed area, providing superior holding with minimal surface marking. The diamond surface provides unparalleled wear resistance. Replacement balls and O-rings can be ordered separately.Select the following link for additional technical information.
|
|
|
|